- -
- Flexible Timings
- Open Enrollments
- Online Zoom Sessions or LMS
- +1 689 286 3561
- info@amiosp.com
Course Overview
The Stairways and Ladders Safety course from the American Institute of Safety Professionals provides comprehensive training on OSHA 29 CFR 1926 Subpart X (Stairways and Ladders) for construction. Falls from ladders and stairways are among the most common construction injuries. Subpart X establishes when stairways or ladders must be provided (at elevation breaks of 19 inches or more where no ramp, runway, or embankment exists), the design and construction requirements for each, and the training that all workers using them must receive.
The curriculum covers ladder types (step, extension, fixed, job-made), ladder selection for the task, ladder setup (4:1 angle for extension ladders, securing, extension above landing), ladder inspection (rails, rungs, hardware, labels), stairway requirements (design, handrails, landings), fall protection at stairways and ladderways, competent person duties, and common ladder/stairway violations. All training is delivered 100 percent online through Microsoft Teams and the American Institute of Safety Professionals LMS.
Upon completion, graduates receive a certificate, wallet card, and transcript, employer-verifiable at amiosp.com/student-verifications.
Learning Outcomes
Upon completing this program, participants will be able to:
- Determine when stairways or ladders are required: at elevation breaks of 19 inches or more where no ramp, runway, sloped embankment, or personnel hoist is provided.
- Select appropriate ladder types: step ladders (self-supporting, non-adjustable), extension ladders (non-self-supporting, adjustable), fixed ladders, and job-made ladders, matching the ladder to the task and load requirements.
- Set up extension ladders correctly: 4:1 angle ratio, extend 3 feet above the landing, secure at top and/or bottom, place on stable level surface, and face the ladder when climbing with three-point contact.
- Inspect ladders before each use: structural damage, cracked rails, missing rungs, defective hardware, label legibility, and the removal-from-service criteria for defective ladders.
- Apply stairway requirements: uniform riser height and tread depth, handrails (one on open side, both on 44-inch+ width), landings, and the construction that provides safe vertical access.
- Apply fall protection at stairways and ladderways: guardrails at stairway openings, offset barricades at ladderway floor openings, and the protection that prevents falls through access points.
Core Curriculum Topics
- Subpart X Requirements: when stairways/ladders are required, competent person, training
- Ladder Types: step, extension, fixed, job-made, multi-position, specialty
- Ladder Selection: duty ratings (Type I/IA/IAA/II/III), height, task matching
- Extension Ladder Setup: 4:1 angle, 3-foot extension, securing, stable base
- Ladder Inspection: rails, rungs, hardware, labels, removal from service
- Stairway Design: riser/tread uniformity, handrails, landings, width
- Fall Protection: guardrails at openings, stairway/ladderway protection
- Three-Point Contact: maintaining three points while climbing, carrying tools
- Job-Made Ladders: construction specifications, cleats, side rails, bracing
- Common Violations: overloading, wrong angle, unsecured, damaged, improper access
Mode of Delivery
Participants will receive online training through Microsoft Teams and LMS. Courses are offered by accredited broadcasters and backed by expert instruction and official study materials. All assessments are conducted online and successful participants are awarded certificates that are accepted internationally.
Course Content
The Stairways and Ladders Safety program is designed for employees, construction workers, supervisors, and safety professionals who regularly use or manage stairways and ladders in the workplace. This course emphasizes hazard recognition, safe practices, regulatory compliance, and strategies to prevent falls and injuries associated with stairways and ladder use.
Core Modules
Participants will explore essential topics to ensure safe stairway and ladder use:
- Introduction to Stairways and Ladders: Types, Risks, and Regulatory Requirements
- Hazard Recognition: Common Causes of Falls and Injuries
- Safe Ladder Selection, Inspection, and Maintenance Practices
- Proper Use Techniques: Ascending, Descending, and Working on Ladders
- Safe Stairway Design, Guardrails, and Handrails
- Personal Protective Equipment (PPE) for Fall Prevention
- Emergency Response Procedures for Ladder and Stairway Incidents
- Promoting a Culture of Fall Prevention and Safety Awareness
Optional / Advanced Modules
Participants may explore additional topics to enhance expertise in stairway and ladder safety:
- Advanced Risk Assessment for Ladder and Stairway Operations
- Case Studies on Ladder and Stairway Incidents and Lessons Learned
- Supervisory Strategies for Enforcing Ladder and Stairway Safety Compliance
- Integrating Ladder and Stairway Safety into Overall Workplace Safety Programs
The Stairways and Ladders Safety program equips participants with practical knowledge, hazard recognition skills, and professional strategies required to prevent falls, ensure safe use, and maintain regulatory compliance in workplaces where stairways and ladders are routinely used.
Entry Requirements
- No prior training required
- No academic degree required
- All instruction in English; working proficiency required
Upon completion, graduates receive an American Institute of Safety Professionals certificate, wallet card, and transcript. Employer-verifiable at amiosp.com/student-verifications.
Program Duration
The program is designed to offer flexible online learning with a minimum instructional contact time of 8 hours. Most learners successfully complete the course within one month, allowing them to progress at their own pace while balancing professional commitments.
Examination
Candidates can take this exam through an assigned portal from the American Institute of Safety Professionals. A passing score is 70% or higher, and exam results are provided right after by email to the address provided.
The exam is open-book, allowing candidates to validate their answers. Any candidates who do not pass have 1 month after their exam to go through the training materials and can take the exam 3 additional times.
Additional Information
For questions about American Institute of Safety Professionals online fees, replacement certificates, additional hardbound materials or any other financial-related issues please feel free to contact accounts@amiosp.com
Who Should Enroll
- Construction workers who use ladders and stairways daily
- Supervisors responsible for providing and inspecting access equipment
- Safety officers managing fall protection compliance
- Competent persons designated for ladder and stairway inspection
- General industry workers using portable ladders
How This Relates To Other Qualifications
- Stairways and Ladders Safety — YOU ARE HERE (Subpart X)
- Walking and Working Surfaces (general industry Subpart D ladders)
- OSHA Focus Four — Fall Hazards (ladder falls within broader fall prevention)
- International Diploma in Construction Safety Management
/Course Certificates/Stairways and Ladders Safety Certificate - American Institute of Safety Professionals.webp)
/Course Wallet Front/Courses Student Wallet Card Front - American Institute of Safety Professionals USA.webp)
/Course Wallet Back/Courses Student Wallet Card Back - American Institute of Safety Professionals USA.webp)
